CONNECTION AND ACCESSORIES
Factory electrical systems were never designed for the power demands placed on them by the car audio amplifiers of today. These amplifiers quickly find themselves starving for power when pushed to the limit. Car audio has one solution in the form of a supplemental energy storage device called the storage capacitor. Similar to a battery, the storage capacitor stores large amounts of energy. Different from a battery, capacitors are designed to be placed near power amplifiers and to deliver power to the amplifier much more quickly. The revised Rockford Fosgate CPCC25 is an excellent example of the latest evolution of capacitors.
First Look
Housed in a silver painted decorative plastic casing, the Rockford Fosgate CPCC25 is a 25-Farad "Carbon Capacitor" energy storage device. The unit is designed to supply power when the demands of your amplifiers exceed the ability of the factory electrical system. According to Rockford Fosgate, the CPCC25’s design allows them to charge and discharge more than 100 times faster than a battery while having the highest power density of any commercially available capacitor."
A Closer Look
This first thing I noticed about handling this capacitor is its relative light weight. In spite of its overall volume (approximately 238 cubic inches), the CPCC25 weighed less than 4 pounds. From the balance, a majority of the weight is attributed to the robust terminal connection block at one end of the unit. Rockford Fosgate attributes this light weight to their electrode forming process which "produces ultra-dense, yet porous carbon electrodes".
The CPCC25 has the ability to accept 2-gauge power and ground wires from the vehicle, and redistributes power to your amplifiers in the form of three pairs of 4-gauge power and ground connections. The connections are made through a nicely constructed distribution blocks on the bottom of the capacitor. A digital meter displays DC voltage on the top of the unit. The LED display was very easy to read and looks cool.
Installation
The installation of the CPCC25 was very straight forward and easy. An integral part of the chassis, the four plastic mounting feet are sturdy and well placed. The supplied charging resistor was very robust and worked well. Using a volt meter, I was able to track the compare the charging voltage to that of the voltage of my system. Charging the capacitor took only about 10 minutes. As far as components go, the CPCC25 is relatively easy to install.
Please do not mistake easy to mean "without potential hazards". There is a lot of energy stored in this capacitor. Rockford recommends that the CPCC25 be fully discharged before servicing the stereo system. Improper installation can lead to damage and potential harm. If you’re not confident in your installation abilities, I highly recommend you seek an authorized Rockford Fosgate dealer for installation assistance. Not only will they do the job correctly, but you’ll add an extra year to the warranty of the CPCC25.
Manuals/Web Support
The owner’s manual was easy to read and provided pictures to make the installation a breeze. It also provided you with a list of tools and other installation consideration so that your install will go smoothly. Nice touch. From reading the manual, I noticed that both the CPCC25 and its larger brother, the 40-Farad CPCC40, share the same housing. It would seem that it would be possible to put the CPCC25 into a smaller chassis.
Rockford Fosgate’s Web site, www.rockfordfosgate.com , contains massive amounts of information and technical assistance. There’s some really good information about Rockford’s products and how to get the best performance out of your system. Since this is a new product, the new image of the product was not available on the Web site at the time of writing this review. The installation manual was available for download in the tech section.
Sound Q & Performance
To test the CPCC25, I used an amplifier and a power supply with the output current of the power supply limited to less than what the amplifier would require to achieve full power. I created this situation to mimic a situation where an amplifier draws more current than an electrical system is able to support. I then played a 30-second bass track with high dynamic content. The results were interesting (See Table 1.)
At the first volume setting, the amplifier produced the same about of power. However, the voltage drop without the CPCC25 was 1.79 VDC versus 0.98 VDC. Next, I raised the volume (one click on the CD player). With the CPCC25, the amplifier produced an additional 81 watts with a DC voltage drop of 1.54 VDC. Without the capacitor, the amplifier shut down. Increasing volume more, I was able to generate over 625 watts of power, or a 34 percent gain in power output.
Summary
When looking to improve your stereo system, it’s best to add a capacitor to your system only after you’ve done what you can to fortify your vehicle’s electrical system. The whole idea behind Rockford’s CPCC25 is to supplement your vehicle’s electrical system, not replace it. It’s here that the Rockford Fosgate CPCC25 delivers what it promises. Using the CPCC25 in your system will help maximize the performance of your amplifier and reliability of your entire system.
Rockford Fosgate CPCC25 On The Sonoda Scale
Highs: Helps amplifiers produce maximum power, cool looking digital voltage gage,
Lows: Large size case, must be wired before mounting, not cheap
Best Use: A must for people wanting the most from their high performance system.
Performance Value:
***
Performance vs. weight:
****
Manuals, Online Support:
****
Rockford Fosgate CPCC25 Specifications
Price & Contact: $339.95; www.rockfordfosgate.com
Rated Capacitance: 25 Farads
Capacitance Tolerance: -10%/30%
Rated Voltage: 16 volts
Surge Voltage: 17 volts
Rated Current: 40 amps
Maximum Current: 250 amps @ 12.6 volts
Maximum Stored Energy: 3200 Joules (0.9 Wh)
Maximum Internal Resistance (ESR): DC (50A): less than 14milli-ohms; AC(50 Hz): less than 14milli-ohms
Operating Temperature Range*: -40 to 140 degrees F (-40 to 60 degrees C)
Storage Temperature: -40 to 158 degrees F
(-40 to 70 degrees C)
Input /Output Connection: (1) 2 AWG, (3) 4 AWG
Dimensions: 3.15 inches x 10 inches x 7.56 inches (80 mm x 254 mm x 192 mm)
* Prolonged operation above the operating temperature limit of the cell will greatly reduce its useful life span. Exposure to temperatures below the operating temperature will reduce the ability of the cell to easily accept a charge.
|
|
|
CEA PREDICTS SALES OF IN-VEHICLE ELECTRONICS WILL GROW TO $12.8 BILLIONSales of in-vehicle consumer electronics (CE) will grow at a rate of 13 percent in 2008 to more than $12.8 billion, according to a recent study released by the Consumer Electronics Association (CEA). West Coast Hot-Rod Legend Boyd Coddington diesThe Associated Press is reporting that car-building legend Boyd Coddington, whose cable TV reality show "American Hot Rod" introduced the nation to the West Coast hot rod guru, has died. He was 63. DuPont Helps Auto OEMs Achieve Reduced EmissionsIn a breakthrough for structural automotive components, DuPont announced that its reinforced DuPont™ Zytel® nylon resin has replaced steel in exhaust system parts on all Volkswagen vehicles built on the current Golf platform, cutting weight of the component by nearly 50 percent. VALUE, PERFORMANCE DRIVE SONY'S LATEST NAV-U NAVIGATION DEVICESFor drivers geared toward value, Sony Electronics is announcing that its new nav-u™ personal navigation devices (models NV-U73T and NV-U83T) are now available at retail and online stores for about $300 and $400, respectively. PIONEER’S SECOND ANNUAL SOUND BUILD-OFF COMPETITION COMMENCESFollowing a successful event last spring in Tucson, Arizona, Pioneer Electronics (USA) Inc. has announced the second annual Pioneer Sound Build-Off. Twenty-two of Pioneer’s Premier nationwide retailers, including the top five that participated in last year’s event as well as the People’s Choice winner, are being challenged to build the best sounding demo vehicle using select Premier-branded audio equipment.
[See More Headlines]
|
|
|
